Version 0.0.5-rc1
 ! Datacom: initialization of card after reflash
 ! b4pshape: loading result of measurements without signal.

 Known bugs:
 - e1hdlc: packet loss
 - RFC2544: not work than test topologi is ethX <-> gbeX
 - R1.5: do not work at all


Version 0.0.4
 + Datacom: g.826 on v24.sync
 * b4-ipxtools: IPX analysis

 Known bugs:
 - e1hdlc: packet loss


Version 0.0.4-rc4
 * b4-powerdown: shutdown from GUI
 ! b4-fw-e1pcm, b4-fw-e1hdlc: bug with opening options
 ! b4-fw-datacom: syncronization in async modes

 Known bugs:
 - e1hdlc: packet loss

Version 0.0.4-rc3
 * b4-firmware-update: new GUI for card`s firmware updating

 Known bugs:
 - e1hdlc: packet loss

Version 0.0.4-rc2
-----------------
 * b4-portconf: half duplex support on 10/100 Mb/s
 * b4ethconf: some bugfixes (empty fields, error when saving config)
 * b4info: bridge firmware version added
 
  Known bugs:
  - b4-portconf: user cannot set broadcast MAC for gbe interfaces
  - e1hdlc: packet loss

Version 0.0.4-rc1
-----------------

 + b4-portconf: ethernet port configuration program
 + b4ethconf: 3 vlan tags and 3 mpls support
 ! b4-gbe-lb: no hangs with no configured interfaces 
 ! b4-leds-clear: resets leds for e1 and datacom cards
 
  Known bugs:
  ----------
   - rfc2544: sometimes, on 10/100 speeds, analizer receives more
              packets, than it send
   - rfc2544: on remote tests, configurator show warning about not saved
              settings on exit, but settings saves correctly
   - e1hdlc:  packet loss

Version 0.0.3
-------------
Known bugs:
 - i7-flow-cas causes postinst error if it installinf before i7-codec-hex
 - Sometime, when plug in card causes error -114
 - GBE expansion cards sometimes reflashes afterm 3-5 attempts

Version 0.0.2-rc2
------------
 * Alarm/error insertion completely works on datacom

Version 0.0.2-rc1
------------
 * Ports on gbe card works as network interfaces

Version 0.0.1
------------
 - b4-drv-base: shutdown pwr diode bug fixed - lcd backlight don`t shut down
 - b4modeset: progressbar working properly
 + b4iptools: graphical frontend (ping, traceroute, arp, arping, ftp, http)
 + b4ethinfo: information about SFP modules and line

Version 0.0.1-rc3
------------
 - b4ethconf: VLAN support added
 - b4ethviwer: some bugfixes


Version 0.0.1-rc2
------------
 - CAS completely works
 - b4ethviewer: fixed twithed graphs



Version 0.0.1-rc1
------------
 - b4viewdata works
 - User can change volume level while playing something
 - Bug fixed in timeslot selection in b4pcmconf
 - Listening of voice channels works with last e1 firmware
 - Bug fixed: after listening of voice channels user now can play
   sound =)
 - G.821: fixed skipping seconds in b4eadaemon with b4pshape running